Epson EB-750F 사용자 설명서 부록 - 페이지 13

{카테고리_이름} Epson EB-750F에 대한 사용자 설명서 부록을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-750F 16 페이지.
Epson EB-750F에 대해서도 마찬가지입니다: 빠른 설정 (4 페이지)

Details of User Operation Change (Version 2.00)

• We recommend selecting Yes. The next time you turn on the

projector and no signal is being input, the connection guide for

the wireless transmitter (Epson Wireless Presentation) is

displayed.

• The message prompting you to set Connection Guide Display

to On is displayed when Connection Guide Display is set to

Off and Content Playback is set to Off.

• You can change the connection guide display in the projector's

Network menu.

s Network > Transmitter Settings > Connection Guide

Display

Remove the wireless transmitter from the projector and insert the

wireless LAN module into the same port used for the wireless

transmitter.

Press the [Menu] button on the control panel or remote control.

Make sure Wireless LAN Power is set to On in the projector's

Management menu and Simple AP is set to On in the projector's

Network Settings menu.

We recommend turning the projector off and then back on to enable the

connection guide display.

If you set the Auto Power On setting to On in the projector's Network

menu, you can start projection even if the projector is in standby mode

(when the power is off).

s Network > Transmitter Settings > Auto Power On

Projecting with the Wireless Presentation System

You can use the paired wireless transmitter to quickly establish direct

connection between the projector (receiver) and Windows/Mac computers

and easily project your images.

Make sure the wireless LAN module is installed into your projector.

Turn on the projector.

Connect the wireless transmitter to a USB port on your computer.

Project your content with the Epson Wireless Presentation software in

the wireless transmitter. See the Epson Wireless Presentation System

User's Guide for details.