Cisco Cisco 525 관리자 매뉴얼 - 페이지 5

{카테고리_이름} Cisco Cisco 525에 대한 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco 525 28 페이지. 5xx series
Cisco Cisco 525에 대해서도 마찬가지입니다: 관리자 매뉴얼 (28 페이지), 빠른 사용 설명서 (7 페이지), 사용자 설명서 (21 페이지), 관리자 매뉴얼 (6 페이지)

페이지 인쇄

SETTING UP YOUR PHONE

What you'll need

Before you begin installing your service, please make sure you have the following equipment:

A Cisco 525 phone body.

A handset and cord.

A desk stand.

A CAT 5 Ethernet computer cable, to connect the phone to your router.

A power supply unit, including a plug lead and clip, assuming you're not using Power Over

Ethernet switches or ports.

A sheet with your phone number, online account user details and voicemail PIN - this is

important information, so please keep it somewhere safe, even after set-up.

A working Ethernet LAN with Ethernet broadband router - USB routers and modems are not

compatible.

A Power over Ethernet switch - or Ethernet switch - depending on your installation.

Assembling the phone

Now, start by putting the phone together in the following order:

First, find the coiled handset cord. Plug it into the smaller socket on the underside of the phone -

this is marked with a phone symbol.

Now, take the other end of the handset cord and plug it into the handset.

Line up the phone stand and the tabs with the slots on the underside of the phone. Slide the

bottom tabs into the slots and press lightly down on the top of the desk stand - don't force it.

Next, push the power brick into the plug unit and plug the power lead into the phone, to

assemble the power supply unit. ONLY IF YOUR NOT USING POE AND HAVE ORDERED

THE ASSOCIATE PSU.

Connect the computer cable to the underside of the phone in the socket marked SW.

Nomis Connections, Connections House, 11a Kings Road, Fleet, Hampshire, GU51 3AA

0844 880 9900

0844 880 0009

[email protected]