Epson EB-755F 빠른 설정
{카테고리_이름} Epson EB-755F에 대한 빠른 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-755F 4 페이지.
Epson EB-755F에 대해서도 마찬가지입니다: 사용자 설명서 부록 (16 페이지)
페이지 인쇄
PowerLite
EB-750F/EB-755F
®
Quick Setup
IMPORTANT: Before using the projector, make sure you read these instructions
and the safety instructions in the online User's Guide.
Note: Your product may differ from the illustrations on this sheet, but the
instructions are the same.
Connect the projector
Computer
Choose from the following connections. See the sections below or the online
User's Guide for details.
HDMI port
Connect one end of an HDMI cable to one of the projector's HDMI ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to one of the projector's Computer ports, and
the other end to your computer's
switch it to external display (see "Troubleshooting"). You can also connect an
audio cable.
USB port
Connect the square end of a USB cable to the projector's USB-B (square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
7 or later: After turning on the projector, follow
®
the on-screen instructions to install the Epson
(EMP_UDSE.EXE; only on first connection). If the software screen does not
display automatically, open My Computer, Computer, or This PC, then
double-click EPSON_PJ_UD.
OS X 10.8.x or higher: After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click USB Display Installer and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection). If the software screen does not display automatically,
double-click EPSON_PJ_UD, then double-click USB Display Installer.
External monitor and speakers
You can connect an external monitor and external speakers to your projector to
enhance your presentations. See the online User's Guide for details.
Wired network
Connect the projector to your network using an Ethernet cable. See "Wired
network configuration" for more information.
VGA cable
USB cable
HDMI cable
monitor port. If you are using a laptop,
USB Display software
®
Video device
Connect multiple video devices and use the Source Search button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online User's Guide.
Component video
to VGA cable
HDMI cable
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector's USB-A (flat) port.
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector's PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User's Guide for details.
Using the remote control
Install the two AA batteries as shown.
Turn projector on
and off
Access projector menus
Turn off projector
display and sound
For more information on using the remote control, see the online User's Guide.
RCA video cable
(composite video)
Audio cable
USB cable
Choose which source
to display
Navigate projector
menus
Control projector
volume
Access the Home
screen