Cisco Cisco Access Registrar 4.2 네트워크 설정 구성 - 페이지 11

{카테고리_이름} Cisco Cisco Access Registrar 4.2에 대한 네트워크 설정 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Access Registrar 4.2 34 페이지. Telepresence conference system
Cisco Cisco Access Registrar 4.2에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 시작하기 매뉴얼 (46 페이지)

Cisco Cisco Access Registrar 4.2 네트워크 설정 구성
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Table 4-2
Network Settings (continued)
Network Setting
DHCP Address
Released
Alternate TFTP
Alternate DNS
Alternate Domain
Erase
Configuration
User Locale
User Locale
Version
Network Locale
Network Locale
Version
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Description
Allows the IP-address assigned by DHCP to be
released.
Indicates whether the phone is using an alternative
TFTP server.
Indicates whether the phone is using an alternative
DNS.
Indicates whether the phone is using an alternative
domain name.
On the Cisco Unified IP Phone 7905G and 7912G,
sets all configuration values except ringer sound to
their factory defaults.
User locale associated with the phone user. The
user locale identifies a set of detailed information
to support users, including language, font, date
and time formatting, and alphanumeric keyboard
text information.
Version of the user locale loaded on the phone.
Network locale associated with the phone user.
The network locale identifies a set of detailed
information that supports the phone in a specific
location, including definitions of the tones and
cadences used by the phone.
Version of the network locale loaded on the phone. Display only—cannot
Verifying Network Settings
Usage Notes
See the
"Releasing a DHCP
Address" section on
page
4-16.
See the
"Enabling an
Alternate TFTP Server"
section on page
4-30.
See the
"Assigning DNS
Servers" section on
page
4-24.
See the
"Assigning a
Domain Name" section on
page
4-22.
See the
"Erasing the Local
Configuration" section on
page
7-17.
Use Cisco Unified
CallManager
Administration to modify.
Display only—cannot
configure.
Use Cisco Unified
CallManager
Administration to modify.
configure.
4-11