Cisco Cisco Access Registrar 4.2 네트워크 설정 구성 - 페이지 5

{카테고리_이름} Cisco Cisco Access Registrar 4.2에 대한 네트워크 설정 구성을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Access Registrar 4.2 34 페이지. Telepresence conference system
Cisco Cisco Access Registrar 4.2에 대해서도 마찬가지입니다: 사용자 설명서 (44 페이지), 시작하기 매뉴얼 (46 페이지)

Cisco Cisco Access Registrar 4.2 네트워크 설정 구성
Chapter 4
Configuring Network Settings on the Cisco Unified IP Phone
Unlocking and Locking Options on the Network Configuration
Menu
Step 1
Step 2
Step 3
Step 4
Cisco Unified IP Phone Administration Guide for Cisco Unified CallManager 4.2, Cisco Unified IP Phone
OL-8617-01
Accessing Network Configuration Settings through the Network Configuration Menu
To exit the Network Configuration menu, take one of these actions:
Press the Cancel softkey to return to the Settings menu.
Press the Menu button to return to the main screen.
Related Topics
Unlocking and Locking Options on the Network Configuration Menu,
page 4-5
Guidelines for Editing Settings in the Network Configuration Menu, page 4-6
Configuration options in the Network Configuration menu are locked by default
to prevent users from making changes that could affect the operation of a phone.
You must unlock these options before you can change them.
When options are inaccessible for modification, a locked padlock icon appears on
the Network Configuration screen. When options are unlocked and accessible for
modification, an unlocked padlock icon
If a password has been specified for the phone, you must enter the password when
unlocking network configuration options. (For more information about
passwords, see
Appendix A, "Additional Configuration Methods and
Parameters.")
To unlock network settings on the Cisco Unified IP Phone 7905G and 7912G,
follow these steps. Network settings are locked again automatically when you
return to the main screen.
Procedure
Press the Menu button.
Choose Settings > Network Configuration.
From the Network Configuration menu, press **#.
If the phone displays "Enter Admin Password," enter your password and then
press the Enter softkey.
appears on this menu.
4-5