Cisco Cisco Headset 561 빠른 참조 매뉴얼

{카테고리_이름} Cisco Cisco Headset 561에 대한 빠른 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Headset 561 2 페이지. Ip phones with multiplatform firmware
Cisco Cisco Headset 561에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지), 빠른 참조 매뉴얼 (7 페이지)

페이지 인쇄
Cisco Cisco Headset 561 빠른 참조 매뉴얼
Cisco Headset 561 and Cisco Headset 562 with Standard Base
For Cisco Jabber
Power/Call
Mute
Volume +/-
High Sound Pressure—Avoid listening to high volume levels for long periods to prevent
possible hearing damage.
When you plug in your headset, lower the volume of the headset speaker before you put
the headset on. If you remember to lower the volume before you take the headset off, the
volume will start lower when you plug in your headset again.
Be aware of your surroundings. When you use your headset, it may block out important
external sounds, particularly in emergencies or in noisy environments. Don't use the
headset while driving. Don't leave your headset or headset cables in an area where
people or pets can trip over them. Always supervise children who are near your headset
or headset cables.
Headset LED status indication
Incoming Call
Active Call
Headset paired with dock
Headset and dock not paired
Base LED status indication
Battery strength
System updating
Headset and dock not paired
Call Indication
Incoming call
Blinking green
Active call
Steady green
Muted call
Steady red
Quick Reference Guide
Blinking red
Steady red
White LED blinking every 4 seconds
White LED blinking rapidly
LEDs show solid as battery charges
LEDs blink in sequence from left to right
All LEDs blinking