Cisco Cisco Headset 562 사용자 설명서 - 페이지 37

{카테고리_이름} Cisco Cisco Headset 562에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Headset 562 46 페이지. Ip phones with multiplatform firmware
Cisco Cisco Headset 562에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 매뉴얼 (40 페이지), 관리 매뉴얼 (48 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지), 빠른 참조 매뉴얼 (7 페이지)

페이지 인쇄
Cisco Cisco Headset 562 사용자 설명서
Troubleshooting
• Check that your desired call device detects your headset. Go to Cisco.com for help with your specific

Other People Can't Hear You on Your Cisco Headset 560 Series

Problem
You cannot be heard when using your Cisco Headset 560 Series.
Solutions
• Check to make sure your microphone is not muted. Press Mute on your controller or wireless headset
• Make sure that the microphone boom has been lowered. For optimal sound, the headset microphone
• Check that your device is detecting your headset. Go to Cisco.com for help with your specific Cisco
• Make sure that your base is properly plugged into your preferred call device. Ensure that the connection
• Make sure that you don't take your headset too far from the base.
• If you use your headset with a multibase, make sure that your desired call source is selected on the base.
Related Topics
Your Headset and Base Won't Pair
Problem
Your headset is seated in the wireless base but they have not paired. The headset and battery indicator LEDs
on the base flash rapidly. It should take no longer than 10–12 seconds for the headset and base to pair.
Solution
Power cycle the headset.
Cisco device.
to mute and unmute your microphone. When you are muted on a call, Mute on your inline controller or
call indicator LED on your base shows solid red.
should be no further than 1 in (2.5 cm) from your mouth.
device.
to and from the base is secure.
Cisco Headset 560
Series, on page 4
Other People Can't Hear You on Your Cisco Headset 560 Series
Cisco Headset 500 Series User Guide
31