Cisco Cisco Headset 562 관리 매뉴얼 - 페이지 22

{카테고리_이름} Cisco Cisco Headset 562에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Headset 562 48 페이지. Ip phones with multiplatform firmware
Cisco Cisco Headset 562에 대해서도 마찬가지입니다: 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (3 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (46 페이지), 매뉴얼 (40 페이지), 설치 매뉴얼 (39 페이지), 매뉴얼 (24 페이지), 빠른 참조 매뉴얼 (7 페이지)

Cisco Cisco Headset 562 관리 매뉴얼

Apply User Profiles to End Users

Procedure
Step 1
From Cisco Unified CM Administration, choose User Management > User/Phone Add > User Profile.
Step 2
Click Add New.
Step 3
Enter a Name and Description for the user profile.
Step 4
Assign a Universal Device Template to apply to users' Desk Phones, Mobile and Desktop Devices, and
Remote Destination/Device Profiles.
Step 5
Assign a Universal Line Template to apply to the phone lines for users in this user profile.
Step 6
If you want the users in this user profile to be able to use the self-provisioning feature to provision their own
phones, do the following:
a) Check the Allow End User to Provision their own phones check box.
b) In the Limit Provisioning once End User has this many phones field, enter a maximum number of
phones the user is allowed to provision. The maximum is 20.
Step 7
Click Save.
Apply User Profiles to End Users
Associate your users to the User Profiles that you've created. The User Profile must be associated with the
end user, and the MAC of the device must be added under the controlled devices to apply the headset template
configuration changes.
Note
If you've already assigned all users to the appropriate User Profiles, you can skip this task.
Procedure
Step 1
To add a new end user to the Unified Communications Manager database manually, perform the following:
a) In Cisco Unified CM Administration, choose User Management > End User.
b) Click Add New.
c) Enter the User ID and Last name.
d) Choose the User Rank from the drop-down list.
e) Complete the fields in the End User Configuration window. For field descriptions, see the online help.
f) Click Save.
Step 2
To associate the end user with the device, perform the following:
a) In Cisco Unified CM Administration, choose Device > Phone.
b) Select the Cisco IP Phone or device.
c) Under Device Information, select User as the Owner and select the Owner User ID.
d) Click Save and Apply Config for the configuration changes to take effect.
Cisco Headset 500 Series Administration Guide
16
Cisco Headset Administration