Cisco Cisco Unified IP Phone 7960G 매뉴얼 - 페이지 17

{카테고리_이름} Cisco Cisco Unified IP Phone 7960G에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Cisco Unified IP Phone 7960G 21 페이지. Ios telephony services ip phone
Cisco Cisco Unified IP Phone 7960G에 대해서도 마찬가지입니다: 사용자 설명서 (21 페이지), 사용자 설명서 (25 페이지), 빠른 참조 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), 사용자 설명서 (20 페이지), 사용자 설명서 (28 페이지), 전화 매뉴얼 (17 페이지), 관리자 매뉴얼 (15 페이지), 설치 매뉴얼 (12 페이지), 사용자 설명서 (16 페이지), 참조 매뉴얼 (24 페이지), 관리 매뉴얼 (29 페이지), 사용자 설명서 (10 페이지)

Call Recording

The call record feature either records all calls, records on demand, or records no

calls. This feature is configured by your service provider. Recorded calls are acces-

sible on the web portal under 'Logs'. Play will be next to the corresponding call log.

To record a call on demand you must first allow the call to be answered. The press

[Record]. Please note that when you start a recording you may not stop a recording

until that call has ended.

Parking a call is an advanced hold feature that allows you to place a call on hold

and pick that call up at any other phone on your phone system. To see how to set

up One-Touch Dial parking slots please refer to the Web Portal section of the user

guide.

If you want to...

Place a call in any parking slot

Place a call in a One-Touch Dial

parking slot (1-10).

Resume a call from a parking

slot that you have assigned a

One-Touch Dial

Resume a call from a parking

slot when you have not assigned

a One-Touch Dial

Then...

Press [more] and then press [Park]. This will park the call in

the first available parking slot.

Press the corresponding One-Touch Dial and the call will be

parked in that slot.

Press the corresponding One-Touch Dial and the call will auto

answer on your phone.

Press [more] until you see [PickUp]. Pressing [PickUp]

will give you a display of all calls currently parked and their

corresponding caller ID. Highlight the correct call and press

[GetCall]. You may also type in the corresponding number on

the keypad to retrieve the call (i.e. the call is in slot 2 press '2'

on the number pad).