Cisco CP-7910GSW 시작하기 매뉴얼 - 페이지 28

{카테고리_이름} Cisco CP-7910GSW에 대한 시작하기 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco CP-7910GSW 34 페이지. Getting started guide

Using Call Forwarding

Step 4

Step 5

Using Call Forwarding

Step 1

Step 2

Step 3

Getting Started with the Cisco IP Phone 7910 Series

3-12

Answer the incoming call that is redirected to your phone.

To dial a different call pickup group number, hang up and begin again.

The Cisco IP Phone 7910 Series telephone includes call forwarding, which allows

you to redirect calls made to your telephone to another phone. This is useful if you

know you will be away from your desk for several days, for example, on a

business trip or a vacation.

Call Forwarding is an optional feature configured by your system administrator.

Although your phone supports this feature by default, your system administrator

might have removed this feature from your phone.

These sections describe how you can set up call forwarding:

•

Forwarding All Calls, page 3-12

•

Forwarding All Calls When Not at Your Phone, page 3-13

Use this procedure to forward all incoming calls to another number.

Press the forward button.

You should hear two beeps.

Enter the number to which you want to forward all your calls.

Be sure to enter the number exactly as you would if you were to call that number.

For example, enter an access code such as "9" or the area code, if necessary. The

LCD displays a message with the number to which your calls are being forwarded.

To cancel forwarding of all calls, press the forward button. You should hear a

beep and the LCD should only show your extension, indicating that call

forwarding is not active.

Chapter 3

Using the Cisco IP Phone 7910 Series

78-11443-02