Cisco CP-7961G-GE 데이터시트 - 페이지 3

{카테고리_이름} Cisco CP-7961G-GE에 대한 데이터시트을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco CP-7961G-GE 8 페이지. Cisco unified ip phone

페이지 인쇄

Feature

Speakerphone, Mute,

and Headset Buttons

Ethernet Switch

Headset Port

Volume Control

Adjustable Foot-Stand

Flexible Power Options

Multiple Ring Tones

Americans with Disabilities

Act (ADA) Features

Signaling Protocol Support

Codec Support

Quality of Service

(QoS) Options

Security

Language Support

Configuration Options

Voice Quality

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Description

The phone offers high-quality speakerphone technology, including easy-to-use speaker On/Off, Microphone

Mute, and Headset buttons. These buttons are lit when active. For added security, the audible dual tone

multifrequency (DTMF) tones are masked when the speakerphone mode is used.

The internal 2-port Cisco Ethernet switch allows for a direct connection to a 10/100/1000BASE-T Ethernet

network through an RJ-45 interface with single LAN connectivity for both the phone and a co-located PC.

The system administrator can designate separate VLANs (802.1Q) for the PC and Cisco Unified IP phones,

providing improved security and reliability of voice and data traffic.

A dedicated headset port eliminates the need for a separate amplifier when using a headset. This feature allows

the handset to remain in its cradle, making headset use simpler.

The convenient Volume Control button on the phone provides for easy decibel-level adjustments for the

speakerphone, handset, headset, and ringer. The handset is hearing aid-compatible (HAC). Additional volume

control gain can be achieved using an inline handset amplifier such as Walker Equipment W-10 and CE-100

amplifiers.

The phone foot-stand is adjustable from flat to 60 degrees to provide optimum display viewing and comfortable

use of all buttons and keys. The foot-stand is keyed to match standard wall-jack configurations for wall mounting.

Two optional wall-mount brackets are also offered, as noted later in this document.

The Cisco Unified IP Phone 7961G-GE supports IEEE 803.af Power over Ethernet (PoE). It also can be powered

locally with a power supply (part number CP-PWR-CUBE-3). Note: The Cisco Unified IP Phone 7961G-GE does

not support Cisco Pre-standard PoE.

More than 24 user-adjustable ring tones are available.

A HAC handset (meets ADA requirements) is available, as well as HAC compliance for magnetic coupling to

approved HAC hearing aids. The dial pad is also ADA-compliant.

The phone offers Skinny Client Control Protocol (SCCP) support.

G.711µ and G.729a audio compression codecs are available.

The phone supports differentiated services code point (DSCP) and 802.1Q/p standards.

The phone supports manufacturing-installed digital certificates, device authentication, and encryption.

Support for more than 20 languages is built in.

IP address assignment can be statically configured or configured through the DHCP client.

Comfort-noise generation and voice activity detection (VAD) programming is performed on a system basis.

Page 3 of 8