Epson EB-G6550WU Guide 기능 및 사양 - 페이지 6

{카테고리_이름} Epson EB-G6550WU Guide에 대한 기능 및 사양을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-G6550WU Guide 8 페이지. High brightness business projectors
Epson EB-G6550WU Guide에 대해서도 마찬가지입니다: 빠른 참조 (20 페이지)

Epson EB-G6550WU  Guide 기능 및 사양
EPSON 3LCD TECHNOLOGY – FOR BRIGHT, FAITHFUL COLOURS
3LCD projectors offer brighter and more accurate colours as they
produce different shades and hues by fi ltering, then mixing beams
of the three primary colours (red, green and blue).
In a 3LCD projector, white light is fi rst split into the three beams of
primary colours. Each beam is then fi ltered through its own LCD
that will give each individual pixel of the image its exact brightness
for each colour. The colour beams are then perfectly recombined in
a prism before being projected out as a complete image.
3LCD projector : RGB are projected at the same time, which makes the single composite image easy on the eyes.
• An independent test by projector review media ProjectorCentral.com in 2009 of about 800 projectors found that on average, 3LCD projectors use 25% less power than
single-chip projectors.
COLOUR LIGHT OUTPUT – TRUE COLOURS SHINING THROUGH
The Brightness Myth
Did you know that the brightness specifi cation (in lumens) for
projectors is only a measurement of its white light output?
In fact, many manufacturers artifi cially boost their projectors'
brightness rating by increasing their white light production capability
at the expense of colour brightness.
How is Colour Light Output measured?
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
Red
Blue
Green
x
x
x
x
x
x
x
x
x
Green
Red
Blue
x
x
x
x
x
x
x
x
x
Blue
Green
Red
Brightness (or White Light
Output) measures the
total amount of white light
projected in lumens on a
nine point grid. It does not
measure colour.
Colour Light Output uses
3 sets of a nine-point grid to
measure the primary colours
- red, green and blue, using
the same approach used to
measure White Light Output
in lumens.
This compares to projectors using single-chip technology that
actually project individual colours sequentially by fi ltering their
single white light beam through a colour wheel, and then relying on
human colour perception to combine the colours in the viewers'
minds.
As a result, 3LCD projectors also offer greater detail, smoother
gradations, no "colour breakup" effect, are easier on viewers'
eyes, and consumer about 25% less power to achieve the same
brightness compared to a single-chip projector using a lamp of the
same wattage.
CLO to Enlighten
To help buyers make better-educated decisions, colour scientists
at the U.S. government's National Institute of Standards and
Technology (NIST – www.nist.gov) have developed Colour Light
Output (CLO) as a specifi cation to provide critical information on a
projector's ability to deliver colour.
Colour Light Output is critically important because it measures
the brightness of Red, Green and Blue. In a 3LCD projector,
these primary colours create white when combined in the right
proportions. Beautifully balanced colour is possible when Red,
Green and Blue combine to produce the exact colours required.
Colour Light Output provides users with an additional way to
evaluate a projector and make more discerning buying decisions.
3LCD
White Light Output
Projector
High CLO
Colour Light Output
White Light Output
Brand X
Low CLO
Colour Light Output
www.3lcd.com
2200 Lumens
=
2200 Lumens
2200 Lumens
= /
800 Lumens
www.colorlightoutput.com