Cisco DATAVOX 7941 사용자 설명서 - 페이지 8

{카테고리_이름} Cisco DATAVOX 7941에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco DATAVOX 7941 17 페이지. Multi-line ip phones
Cisco DATAVOX 7941에 대해서도 마찬가지입니다: 사용자 설명서 (19 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (26 페이지), 사용자 설명서 (6 페이지), 사용자 설명서 (14 페이지), 사용자 설명서 (6 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (21 페이지), 사용자 설명서 (4 페이지), 빠른 참조 매뉴얼 (4 페이지), 사용자 설명서 (7 페이지), 설정 (11 페이지), 빠른 참조 매뉴얼 (1 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (2 페이지), 사용 설명서 (3 페이지), 매뉴얼 (11 페이지), 편지 (2 페이지), 사용자 설명서 (2 페이지), 참조 매뉴얼 (3 페이지), 사용자 설명서 (2 페이지), 빠른 시작 매뉴얼 (2 페이지)

페이지 인쇄
Cisco DATAVOX 7941 사용자 설명서
•
Enter the desired 2-digit speed dial code
Speed Dial (for 7961 model only)
You can assign up a phone number to a
Speed Dial soft key.
•
Dial 74*
•
At the prompt, press a Speed Dial
softkey
•
Enter the phone number you want to
assign to this soft key and press #
•
After the prompt, press # and hang up
Dialing a Speed Dial Number
•
Get dial tone.
•
Press the Speed Dial soft key.

Call Block (Selective)

Selective Call Rejection lets you program your
phone to reject calls from a list of telephone
numbers.
To configure your Call Block List
•
Dial *60
•
Follow the voice prompts to enable or
disable the feature, or add the last caller
to the blocked list, or list blocked
numbers.

Call Forward (All Calls)

Call Forward (All Calls) lets you forward all
incoming calls to another number.
To Enable Call Forwarding
•
Press the Forward softkey.
•
Enter the phone number for the
forwarding destination. On external
phone numbers, include the Outside
Access Digit.
•
Press the Forward softkey again. The
number should appear on the LCD.
To Disable Call Forwarding
•
Press the Forward two times.

Call Forward (Busy)

Call Forward (Busy) forwards calls to another
number when you are already on a call.
To Enable Call Forward (Busy)
•
Dial 76*
•
Enter the phone number for the
forwarding destination followed by #
•
Press # to confirm
•
Press 2 to exit, then hang up
To Cancel Call Forward (Busy)
•
Dial 77* and then hang up
FeatureTel Cisco 7941/7961 IP Phone User Guide

Call Forward (No Answer)

Call Forward (No Answer) lets you forward
calls when you don't answer.
To Enable Call Forward (No Answer)
•
Dial 78*
•
Enter the extension or number for the
forwarding destination followed by #
•
Press # to confirm
•
Press 2 to exit, then hang up
To Cancel Call Forward (No Answer)
•
Dial 79* and then hang up

Call Forward (Out of Service)

Call Forward (Out of Service) automatically
forwards calls to another location when your
phone goes out of service. The forwarding
destination is configured through the Web
Portal or by FeatureTel.
To Enable Call Forward (OOS)
•
Dial 70*
•
Press # to confirm
•
Press 2 to exit, then hang up
To Disable Call Forward (OOS)
•
Dial 71* and then hang up

Call Forward (Selective)

Call Forward (Selective) forwards calls from
certain numbers to another number.
To Configure the Selective Call List
•
Dial *63
•
Follow the voice prompts to enable or
disable the feature, or add, delete, or list
numbers to be forwarded.
NOTE: Disabling Call Forward (Selective) will
not delete the Selective Call List. When
entering an external telephone number to the
list, enter the 10-digit number. Do not include
the Outside Access Digit.

Call Jump

Call Jump forwards a call already in progress
to another number.
•
Dial **# + phone number + # to send the
call to that phone number.
•
Dial **8 (**V) to send the call to voice
mail
•
Dial **0 to cancel an initial * or **
NOTE: This feature requires FeatureTel Web
Portal service. You cannot jump to or from an
emergency services number.
Page 6