Cisco IP 7960, SPA 501G 사용자 설명서 - 페이지 11

{카테고리_이름} Cisco IP 7960, SPA 501G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IP 7960, SPA 501G 18 페이지. Spa300 and spa500 series ip phone with cisco unified communications uc320w
Cisco IP 7960, SPA 501G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (14 페이지), 구성 매뉴얼 (12 페이지), 빠른 참조 카드 (2 페이지)

페이지 인쇄

Click on the Submit All Changes button.

You'll have to wait sometime prior for the device to reboot. If everything is done

as above described, you should have successfully registered your phone to

PBXware. Dial *123 to verify registration.

DNS SRV

4.1.3.2

This chapter describes how to use a DNS SRV record which specifies the location of the

N O TE

PBXware.

Bicom Sy stem s can prov ide serv ice to set up this for y ou.

1. Login to phone web administration interface.

Open a new browser window and enter your phone IP address in order to access

the phone web administration interface login screen. Example:

http://192.168.1.22.

Please note, factory default login details are username: admin and password:

admin.

Click on Admin Login and then on Advanced.

Click on Ext 1 or Ext 2, Ext 3 and Ext 4.

Enter or set the following details into the respective fields.

REQUIRED FIELDS

Line Enable

Make sure the Yes is selected.

Proxy

In the Proxy field enter the Hostname.

- Example for the Hostname: bicomsystems.com

Make sure you replace Hostname from this example with your PBXware

Hostname.

Make sure DNS server is configured to automatically route registration request to a

PBXware which is actually under another domain name, example:

newbicomsystems.com.

Use DNS SRV

Select Yes.

Y our DNS Serv er needs to be configured correctly for this to work.

Registering Phone