Cisco IP 7960, SPA 501G 빠른 참조 카드 - 페이지 2
{카테고리_이름} Cisco IP 7960, SPA 501G에 대한 빠른 참조 카드을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IP 7960, SPA 501G 2 페이지. Spa300 and spa500 series ip phone with cisco unified communications uc320w
Cisco IP 7960, SPA 501G에 대해서도 마찬가지입니다: 사용자 설명서 (18 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 시작 매뉴얼 (14 페이지), 구성 매뉴얼 (12 페이지)
페이지 인쇄
Monitoring Calls on a Shared Line, Shared
Extension, or Busy Lamp Field (BLF)
The line button
indicates the status.
• Unlit: Idle.
• Green (steady): Connected to a call on this phone.
• Green (flashing): Holding a call on this phone. To
resume the call, press the phone button.
• Orange (flashing): Ringing.
• Red (steady): Connected to a call on another user's
phone.
• Red (flashing): Holding a call on another user's
phone. To pick up the call, press the line button.
• Orange (steady): There is an error. Contact your
phone administrator for assistance.
Parking and Unparking Calls
• Use a star code:
– Park a call: Place the call on hold. Press
3
8
. Enter an easily remembered number
*
for your park slot. Press
#
.
– Unpark a call: Lift the handset. Press
Enter the park slot number. Press
• Use a softkey:
– Park a call: Press the right-arrow
navigation button and then press
. Enter an easily remembered number
Park
for your park slot. Then press
– Unpark a call: Press the right-arrow
navigation button, and then press
Enter the park slot number. Press
• Use a feature button (if available): Press the Park
Slot feature button
. To unpark, press the same
feature button, such as Park Slot 1, or use one of the
other techniques described in this section.
Picking Up a Call for Another User
Not available on SPA301 or SPA501G
• Enter an extension number: Press
the extension number. Press
Dial
• Use a feature button (if available): Press the
feature button
, which displays the user's name.
Picking Up a Call from a List of Ringing Calls
Not available on SPA301 or SPA501G
• Use a softkey: Press the right-arrow navigation
button, and then press
GrPick
(Group Pickup). Use the navigation button to choose
a call, and then press
.
Dial
• Use a feature button (if available): Press
the Group Pickup feature button
the navigation button to choose a call, and
then press
.
Dial
Diverting Calls to Voicemail
• Ignore a ringing call: Press
forwarded to your Call Forward No Answer number
(usually voicemail).
• Prevent new calls from ringing your phone: Press
Dnd
your Call Forward No Answer number (usually
voicemail). To clear, press
(Clear Do Not Disturb).
Forwarding Calls to Another Number
• Forward all incoming calls: Press
Cfwd
calls. Then enter an extension or phone number.
Press
extension).
• Cancel Call Forward All: Press
Clr Fwd
Using the Site Directory
3
9
.
*
To find extension numbers for users, groups, and
#
.
system features, press
Use the navigation button to choose a
directory. To place a call, select a number, and
then press
Using Feature Buttons
#
or
.
Dial
Your phone administrator may configure feature
buttons for your phone. Ask your phone
Unpark
.
administrator for details. Not available on
or
.
SPA301, SPA501G, or SPA502G
#
Dial
• Auto-dial (system speed dial): Immediately calls or
transfers a call to the specified extension or phone
number. The transfer is non-consultative.
• BLF (Busy Lamp Field): Monitors the specified
extension. Can be used to pick up a ringing call, to
immediately call the target, or to transfer a call to the
target. The transfer is non-consultative.
. Enter
Pickup
• Block Caller ID: Blocks your caller ID for a new call.
.
Lasts for the duration of the call.
• Park Slot: Places a call on hold in the specified park
slot, such as Park Slot 2. To unpark, press the same
park slot button on any IP phone.
• Force Night: The function depends on the Day/
Night settings for your phone system.
– In a manual day/night system: Press to toggle
or
Grpickup
between Day mode (green) and Night mode (red).
– In an automated day/night system: Press to
temporarily override the schedule by enabling
Night mode (red). Press again to resume the
. Use
normal schedule (green).
. The call is
Ignore
(Do Not Disturb). All calls are forwarded to
or
-Dnd
Clr Dnd
Forward
(Call Forward) to forward all incoming
(not required if you entered an
Dial
or
-Cfwd
(Clear Forward).
or
.
Dir
Directory
.
Dial
• Intercom: Initiates a two-way call to the phone
speaker of the specified user. To end the intercom
call, press the button again.
• Individual Pickup: Flashes to indicate a ringing call
on the specified extension. Press to pick up the call.
• Group Pickup: Flashes to indicate a ringing
call on any extension. Press to display a list of
ringing calls. Use the navigation button to
choose a call, and then press
Creating a Personal Speed Dial Button
If there is an unused feature button
you can add a personal speed dial.
or
1. Press and hold the unused button for 3 to 4
seconds.
2. To enter the Name, repeatedly press the
corresponding key on the keypad until the
desired letter appears. To erase a character,
press
delChar
arrow navigation button.
3. In the PhoneNo field, enter an extension or phone
number, including any required outside line digit,
such as 9. Finally, press
Using Star Codes
• Enter a code manually (all models): Lift the
handset. Press
*
details, see your phone user guide (links in the
Where to Go from Here section).
• Select a star code on Cisco SPA50xG
models (except SPA501G): Lift the handset.
Press the right-arrow navigation button
twice. Press
*code
arrow navigation button to select a star code.
Press
. Additional prompts may appear.
Dial
• Select a star code on Cisco SPA525G/G2:
Lift the handset. Press Option, and then
select Input Star Code. Press the down-
arrow navigation button to select a star code.
Press
. Additional prompts may
Select
appear.
Where to Go from Here
• Cisco Small Business Support Community:
www.cisco.com/go/smallbizsupport
• Additional Phone Documentation:
www.cisco.com/go/uc300 (see the Resources
tab)
.
Dial
on your phone,
. When finished, press the down-
.
Save
, followed by the code. For
. Press the down-