Epson EB-L12000Q 펌웨어 업데이트 - 페이지 12

{카테고리_이름} Epson EB-L12000Q에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-L12000Q 33 페이지.

페이지 인쇄

Details of Updated Projector Menus (Version 3.00)

Refer to these sections for details about projector menu changes.

g g Related Links

• "Camera Function Error Details"

• "Auto Adjusted Setting Items During Screen Matching"

• "Point Correction"

p.12

• "Adjustment Level for Color Matching"

• "Enable and Disable Color Calibration"

• "Lens Calibration History"

p.13

• "Brightness Level"

p.14

Camera Function Error Details

New Error Display (Version 3.00)

When camera function errors occur, the error details are displayed.

Error code

0x01

0x02

0x03

For details on the operating conditions for the camera function, see the

projector's User's Guide.

Auto Adjusted Setting Items During Screen Matching

Blend Curve is added to the auto adjusted setting items when you select

Extended > Multi-Projection > Screen Matching > Start Auto Adjustment.

Previous Setting Items (Version 2.10)

Brightness Settings, Black Level (Color Adjustment only)

p.12

p.13

Status

Measurement value error

Measurement failure

Switch camera failure

New Setting Items (Version 3.00)

Brightness Settings, Black Level (Color Adjustment only), Blend Curve

Point Correction

The following changes are applied to the point correction function.

• You can select the grid numbers for vertical and horizontal point correction

individually.

• You can select up to 33×33 for grid point correction.

• You can select which method is performed for point correction, linear

interpolation or curve interpolation.

Previous Settings Menu (Version 2.10)

Point Correction

Pattern Color

Reset

New Settings Menu (Version 3.00)

Point Correction

Points (Vert.)

Points (Horiz.)

Pattern Color

Interpolation

Reset

Setting values

[3x3], [5x5], [9x9], [17x17]

Setting values

[3], [5], [9], [17], [33]

Line, Curve