Cisco IP DECT 6825 빠른 시작 매뉴얼

{카테고리_이름} Cisco IP DECT 6825에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IP DECT 6825 2 페이지. Masergy
Cisco IP DECT 6825에 대해서도 마찬가지입니다: 하드웨어 설치 (18 페이지), 사용자 설명서 (17 페이지), 사용자 설명서 (37 페이지), 사용자 설명서 (7 페이지)

페이지 인쇄
Cisco IP DECT 6825 빠른 시작 매뉴얼
Your Handset
1
2
Legend
Indicator light (LED)
Emergency button (if configured)
Headset port
Softkeys, phone control buttons (Speaker, Menu),
Navigation cluster (Navigation ring and Select button,
call control buttons (Answer/Send, Power/End)
Keypad
Volume and Mute buttons
Cisco IP DECT 6825 Handset Quick Start Guide
Turn On Your Handset
1
2
Press and hold Power/End
Turn Off Your
Press and hold Power/End
Lock the Handset Keypad
You can lock the handset keypad to stop accidental dialing.
When you lock the keypad, you can still dial emergency
numbers. The softkey label does not display when you lock
the keypad.
Press and hold Zero (0)
"Press and hold 0" is displayed on the screen.
Unlock the Handset Keypad
You must unlock the handset keypad to make calls. You
can however, dial emergency numbers from the locked
keypad. When you unlock the keypad, the softkey labels
appear..
Press and hold Zero (0)
"Press and hold 0" does not display on the screen.
Make a Call
1.
When your handset is idle, enter the phone number
with the keypad.
2.
Press Answer/Send
until the screen turns on.
Handset
until the screen turns off.
until the message
until the message
or Call softkey..
Report an Emergency Situation
(If configured)
Press and hold Emergency
Answer a Call
Press Answer/Send
or Answer softkey.
Hold and Resume a Call
1.
From an active call, press Hold softkey.
2.
Press Resume softkey to pick the call back up.
Mute Your
Call
1.
Press Mute hard button
on side of handset.
2.
To unmute yourself, press Mute again.
Create a Conference Call
1.
From an active call, press Conf softkey, then press
the Hold softkey.
2.
Enter the coworker's number and press
Answer/Send
or Call softkey.
3.
Press the Swap softkey to swap between the first party
on hold and the second party called.
4.
Press Conf softkey after the coworker answers.
Transfer a Call
1.
From an active call, press Transfer.
2.
Enter the coworker's number and press Answer/
Send
or Call softkey.
3.
Press Transfer after the first ring tone or after your
coworker answers.
for 3 seconds.
1 |
P a g e