Cisco IP Phones 설치 및 구성 매뉴얼 - 페이지 8
{카테고리_이름} Cisco IP Phones에 대한 설치 및 구성 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco IP Phones 10 페이지. Netvanta unified communications technical note
페이지 인쇄
Ensure Cisco firmware and configuration files are present in the TFTP Server.
Navigate to .\Program Files\ADTRAN\NetVanta UC Server\Data\TFTP.
Ensure (at a minimum) that the following files are present:
If not present, perform the steps outlined in
Configuration on page
2. The Cisco phone does not download its configuration from the TFTP server after being
assigned an identity with the UC client.
Verify the following:
NetVanta TFTP service is running.
Select Start > Control Panel > Administrative Tools > Services.
Scroll down to NetVanta TFTP Server.
Ensure service is set to Automatic and is running.
Ensure Windows Firewall is not blocking the TFTP port.
Disable Windows Firewall.
Or
Create an exception for the NetVanta TFTP Service program:
For example, C:\Program Files\ADTRAN\NetVanta UC
Server\Bin\TFTPService.exe.
Ensure that configuration files exist for the phone being provisioned.
Navigate to .\Program Files\ADTRAN\NetVanta UC Server\Data\TFTP.
Ensure (at a minimum) that the following files are present:
If not present, redo the steps outlined in
Configuration on page 1.
Ensure that the NetVanta UC Server Application Services service has full
permissions for the TFTP folder .\Program Files\ADTRAN\NetVanta UC
Server\Data\TFTP.
SIPDefault.cnf
template.cnf
1.
SIPDefault.cnf
SIP<MAC>.cfg (where <MAC> is the MAC address of the phone being
provisioned)
Enabling Cisco SIP Phone
Enabling Cisco SIP Phone
8