Cisco Linksys PAP2 설치 및 문제 해결 매뉴얼 - 페이지 16
{카테고리_이름} Cisco Linksys PAP2에 대한 설치 및 문제 해결 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Linksys PAP2 46 페이지. Cisco ip phone adapter with 2 ports for voice-over-ip installation and troubleshooting guide
페이지 인쇄
Phone Adapter with 2 Ports for Voice-over-IP
After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your
selection. To save the new setting, press 1. To review the new setting, press 2. To re-enter the new setting, press
3. To cancel your entry and return to the main menu, press * (star).
For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the #
(pound) key to indicate that you have finished entering the IP address, and then press 1 to save the IP address.
To cancel your entry and return to the main menu, press * (star).
If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the
menu by pressing ****.
The settings you have saved will take effect after you have hung up the telephone. The Phone Adapter may
reboot at this time.
Action
Command
(press these
keys on the
telephone)
Enter Interactive Voice
****
Response Menu
10
Interactive Voice Response Menu
Choices
Description
Use this command to enter the
Interactive Voice Response Menu. Do
not press any other keys until you
hear, "Configuration menu. Please
enter option followed by the # (pound)
key or hang up to exit."
Chapter 4: Using the Phone Adapter's Interactive Voice Response Menu
Using the Interactive Voice Response Menu