Cisco M5 하드웨어 설치 매뉴얼 - 페이지 11

{카테고리_이름} Cisco M5에 대한 하드웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco M5 42 페이지.
Cisco M5에 대해서도 마찬가지입니다: 기본 사용 설명서 (12 페이지), 유지 관리 매뉴얼 (6 페이지)

Cisco M5 하드웨어 설치 매뉴얼
Overview
3
Power LED:
5
System status LED:
7
Fan status LED:
• Off—There is no AC power to the chassis.
• Amber—The chassis is in standby mode.
• Green—The chassis is in main power mode. Power
is supplied to all components.
• Green—The chassis is running in normal operating
condition.
• Green, flashing—The chassis is performing system
initialization and memory check.
• Amber—The chassis is in a degraded operational state
(minor fault).
• Power supply redundancy is lost.
• CPUs are mismatched.
• At least one CPU is faulty.
• At least one DIMM is faulty.
• At least one drive in a RAID configuration failed.
• Amber, two flashes—There is a major fault with the
system board.
• Amber, three flashes—There is a major fault with the
DIMMs.
• Amber, four flashes—There is a major fault with the
CPUs.
• Green—All fans are operating properly.
• Amber, flashing—One or more fans breached the
unrecoverable threshold.
4
Unit identification LED:
• Off—The unit identification
function is not in use.
• Blue, flashing—The unit
identification function is
activated.
6
Power supply status LED:
• Green—All power supplies are
operating normally.
• Amber—One or more power
supplies are in a degraded
operational state.
• Amber, flashing—One or more
power supplies are in a critical
fault state.
8
Network link activity LED:
• Off—The Ethernet port link is
idle.
• Green—One or more Ethernet
ports are link-active, but there is
no activity.
• Green, flashing—One or more
Ethernet ports are link-active with
activity.
Cisco Threat Grid M5 Hardware Installation Guide
Front Panel LEDs
7