Epson EB-L20000U 펌웨어 업데이트 - 페이지 13
{카테고리_이름} Epson EB-L20000U에 대한 펌웨어 업데이트을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-L20000U 33 페이지. Multimedia projector
Epson EB-L20000U에 대해서도 마찬가지입니다: 빠른 참조 (21 페이지)
페이지 인쇄
Details of Updated Projector Menus (Version 3.00)
If you have already made corrections using Point Correction, you may
not be able to change Interpolation if the amount of correction is too
large.
a
Adjustment Level for Color Matching
The All setting value is added to the Adjustment Level menu from Extended
> Multi-Projection > Screen Matching > Color Matching.
Previous Settings Menu (Version 2.10)
Sub menu
Color Matching
Adjustment Level
New Settings Menu (Version 3.00)
Sub menu
Color Matching
Adjustment Level
There are eight levels from All, white, through gray, and up to black. When
you select All, you can adjust the color for each color in Adjustment Level 2
to 8 at the same time. (Once the red, blue, and green values are at their
maximum or minimum position at any level, you cannot make any further
adjustments.) Select Adjustment Level 1 to 8 to adjust each level individually.
Enable and Disable Color Calibration
You can enable or disable color calibration in the Color Calibration setting.
You need to set the Color Calibration setting to On to execute the auto
adjustment function for color calibration.
Items or setting values
1, 2, 3, 4, 5, 6, 7, 8
Items or setting values
All, 1, 2, 3, 4, 5, 6, 7, 8
Lens Calibration History
Previous Settings Menu (Version 2.10)
Top menu
Sub menu
Extended
Color Calibration
New Settings Menu (Version 3.00)
Top menu
Sub menu
Extended
Color Calibration
The History menu is added to the Lens Calibration menu. You can use the
History menu to check the lens calibration history.
Previous Settings Menu (Version 2.10)
Top menu
Sub menu
Extended
Operation
Items or setting values
Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
Items or setting values
Color Calibration
On, Off
Start Auto Adjustment
Undo
Redo
Color Uniformity
Reset
Items or setting values
Lens Calibration
Start
13