Epson EB-L30002U 설치 핸드북 - 페이지 9

{카테고리_이름} Epson EB-L30002U에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-L30002U 16 페이지.
Epson EB-L30002U에 대해서도 마찬가지입니다: 매뉴얼 (17 페이지)

Transport and Installation Handbook

You may need dedicated installation mounts to tilt and install the projector.

Contact a specialist and prepare the mount.

•

Plan so that the mount does not fall.

•

Make sure the mount is strong enough to support the projector.

•

When attaching a mount to the projector, secure the mount with bolts using the handle

securing section (6 points) on the top or base of the projector.

Since special techniques are required to install the projector on a ceiling

(ceiling mount) or in a high location, make sure you contact a professional.

If installation work is not carried out correctly, the projector could fall down. This may result

in injury or accidents.

Note the following points when installing so that the projector's air intake

vent or air exhaust vent are not covered.

If either of the vents is covered, the internal temperature could rise and cause a fire.

•

Make sure you secure the following space around the projector.

•

When setting up multiple projectors, make sure there is a gap of at least 200 mm between the

projectors.

•

Make sure you secure the following space when installing with the air intake vent underneath.

•

A gap of at least 100 mm between the installation surface and the air intake vent.

•

A space of 800 x 350 mm around the entrance of the air intake vent.

Warning

500mm

200mm

800mm

100mm

350mm