Cisco Razorline 7975 사용자 설명서 - 페이지 11
{카테고리_이름} Cisco Razorline 7975에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Razorline 7975 14 페이지. University voip
Cisco Razorline 7975에 대해서도 마찬가지입니다: 기능 설명서 (2 페이지), 빠른 시작 매뉴얼 (30 페이지), 빠른 참조 (5 페이지), 빠른 참조 매뉴얼 (2 페이지)
페이지 인쇄
Do Not Disturb (DND)
Do Not Disturb instantly routes all of your incoming calls to your
voice mailbox. You can record a special voice mail greeting that
callers will hear when you have DND active.
If you want to... Then...
Enable DND
Press the DND soft key or lift the handset and dial
*04 and hang up.
The display will show "Do Not Disturb is active"
Disable DND
Press the DND soft key or lift the handset and dial
*04 and hang up.
The "Do Not Disturb is active" message will disap-
pear.
Intercom
Intercom allows you to make an announcement through another
person's speakerphone.
To initiate an intercom call
Press the More soft key until you see the Intercom soft key
Press the Intercom soft key
Dial the extension of the other party
Begin speaking after you hear two beeps
Note: If the other party is on the phone, your intercom will come
across as a new call to either answer or ignore.
Priority Call
Priority Call lets you define a list of callers identified as priority call-
ers using a unique ring tone when they call you. The Priority call
menu provides step-by-step instructions on enabling/disabling the
feature and manage the priority list.
Page 18
Basic Call Handling
This section covers basic call-handling tasks such as placing, answer-
ing, transferring, and conferencing calls.
Placing a Call
If you want to... Then...
Pre-dial (dial on-
Enter the outside access digit and the phone num-
hook, without
ber. Next, press Dial. Or do one of these actions
first getting a dial
to go off-hook and dial the number:
tone)
Lift the handset
Press the speakerphone or headset button
Press a line button
Dial using the
You can press the speakerphone before or after
speakerphone
dialing, re-dialing or speed dialing a number.
Redial the most
Press the Redial soft key or dial *07. By default,
recently dialed
Redial uses your primary line. However, you can
number
open a secondary line and then press Redial.
Place a call when
Press a line button for the new line. The call on
another call is
the first line will be placed on hold automatically.
active (using an-
other line)
Place a call when
Press New Call. The original call will be placed on
another call is
hold automatically. Then dial, redial, or speed dial
active (using the
a number.
same line)
Dial from a call
Choose Missed, Received, or Placed calls from the
log
Directory. To dial, select the listing or scroll to it
and go off-hook.
Dial a long dis-
Dial the outside access digit + 1 + the phone num-
tance number
ber.
Dial an interna-
Dial the outside access digit + 011 + country code
tional number
+ the phone number.
Page 11