Ricoh 9927DP 시스템 설정 - 페이지 13

{카테고리_이름} Ricoh 9927DP에 대한 시스템 설정을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh 9927DP 31 페이지. System settings

Modes

Multi-access

You can carry out another job using a different function while the current job is

being performed.

This allows you to handle your jobs efficiently regardless of how the machine is

being used. For example:

• While making copies, the machine can send a fax message that has been

stored in memory.

• You can make copies while receiving fax data.

• The machine can receive print data in any mode.

Performing multiple functions simultaneously like this is called Multi-access.

Limitation

When paper longer than 313 mm, 12.3" is set in the optional finisher, or paper

is jammed in the optional staple unit, copies cannot be delivered to the finish-

er tray. However, incoming faxes will still be printed and delivered to the in-

ternal tray.

Note

You can choose which mode has highest priority for print jobs. The default is

"Copy". See "16. Print Priority" in

When your machine is equipped with optional internal tray 2, you can specify

the tray used for each function so that completed documents are not mixed.

For example, set one tray for faxes and another tray for copies. If you require

optional internal tray 2, contact your local dealer or service representative.

See "15. Output Tray Prio." in

-Sample operations

This chart is based on the following conditions:

• "16. Print Priority" is set to "Interleave" (See "16. Print Priority" in

"System Settings

• For details on operations under other conditions, contact your service repre-

sentative.

P.21 "System Settings

P.21