Ricoh Aficio 700 사용 설명서 - 페이지 12

{카테고리_이름} Ricoh Aficio 700에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio 700 44 페이지. Sap printing
Ricoh Aficio 700에 대해서도 마찬가지입니다: 매뉴얼 (12 페이지)

Getting Started

Network cable requirements

Optional Network Interface Board Type 450-E can be installed to allow direct

connection to an Ethernet network.

Network Interface Board supports 10BASE-T or 100BASE-TX connections.

You can use the machine in the following network environments:

• Using the appropriate network management software and printer driver.

• Attaching the machine to a networked computer set up as a server.

Client

Driver

File Server

Protocol

Under Windows NT 4.0, only × 86 CPU is supported.

In a mixed network environment, the protocol switches automatically.

Reference

For more information about resolving network connection problems, see P.13

"Configuring the Printer for the Network".

Note

Consult your network administrator before connecting the machine to a net-

work.

Be sure to use properly shielded and grounded cable (STP, Category/Type5)

for the connection to the host computer (and/or HUB) in order to meet FCC

and EMC Directive 89/336/EEC emission guidelines.

Parallel cable requirements

Connect the machine to the host computer using a parallel port. This machine

does not provide the parallel cable to connect the machine to the host computer.

The machine's parallel interface is a standard bi-directional interface. It requires

a standard 36-pin parallel cable compliant with IEEE 1284 and a parallel port

available on the host computer.

Note

Do not use a parallel cable that is longer than 3 meters (10 feet).

Windows 95, 98, Windows 2000, Windows NT 4.0,

(optional PostScript 3 Kit Type 850 is required )

PCL 6/5e, PostScript 3

NetWare 3.x, NetWare 4.x, NetWare 5

TCP/IP, IPX/SPX, AppleTalk

, Mac OS