Epson EB-W16SK 시작 매뉴얼 - 페이지 14

{카테고리_이름} Epson EB-W16SK에 대한 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-W16SK 19 페이지. 3d business projectors
Epson EB-W16SK에 대해서도 마찬가지입니다: 사양 (6 페이지)

페이지 인쇄

Projecting

Images

Superimposing the

images from the

commander and the

receiver

Superimpose two

images. Perform after

setting up.

Open the A/V mute

slides.

Open the A/V mute slides on the

commander and the receiver.

■

When suspending the

projectors from a

ceiling, change the

Commander frame

Projection mode before

superimposing the images.

You can change the

Projection mode by

holding down the [A/V

Mute] button on the

remote control for about

five seconds.

Turn on the projectors.

Press the [

] button on the

commander's control panel.

The commander and the receiver

turn on.

Superimposing Images

Receiver frame

(white)

(green)

• Pressing buttons on the control panel operates the

commander and the receiver. Perform projector

operations from the commander's control panel.

• The following icon is displayed when turning on. The

projector indicated by the arrow is the subject of the

displayed message.

Commander

Receiver

Adjusting the Focus

Match the focus for the commander and the receiver.

Determining the size of the receiver's frame

Adjust the receiver's projection size to fit the screen.

Surrounding the receiver's frame with the

commander's frame

Adjust the commander's frame (white) so that it is outside the

receiver's frame (green).

The screens fit together.

Display the screen

to adjust the

superimposed images.

Hold down the [Screen Fit]button

for about five seconds.

The adjustment top screen is

displayed.

Approx.

five seconds