Epson EB-W16SK 시작 매뉴얼 - 페이지 9

{카테고리_이름} Epson EB-W16SK에 대한 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson EB-W16SK 19 페이지. 3d business projectors
Epson EB-W16SK에 대해서도 마찬가지입니다: 사양 (6 페이지)

Caution

When attaching the

commander to the

receiver, be careful not to

trap your fingers.

Secure the stacker angle adjustment section with screws.

There are screw holes

numbered 1 to 4 on

the left and right of the

stacker mount.

You can change the

commander's projection

angle by changing the

position secured by the

screw.

See "Screen Size and

Projection Distance" on

page 18 to determine

which screw hole to use.

Attach the commander to the receiver. Place the commander's screws

into the gap in the receiver's mount, and then tighten the screws. (on the

left and right)

Place the screws into the holes, and then tighten them. (on the left and

right)

Stick a marking

sticker on the

position where the screw

is secured. You can then

use these marks (on the

left and right) when

reassembling.

Remove the clear protective film

from the polarizers.

Remove the protective

film from the polarizers.

9 9 9 9 9