Cisco SPA 303 알아보기

{카테고리_이름} Cisco SPA 303에 대한 알아보기을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA 303 3 페이지. 3–line ip phone
Cisco SPA 303에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (5 페이지), 빠른 시작 매뉴얼 (6 페이지), 관리자 매뉴얼 (6 페이지), 빠른 시작 매뉴얼 (21 페이지), 패키지 내용물 설명서 (7 페이지)

Getting to Know the Cisco SPA 303 IP Phone

1) Handset – Pick up to place or answer a call

2) Message Waiting Indicator - Displays solid red when you have a new voice mail

message. Flashes red during an incoming call or when the phone's firmware is being

updated.

3) LCD Screen – Displays solid red when you have a new voice mail message. Flashes

red during an incoming call or when the phone's firmware is being updated.

4) Line Keys - Indicates phone line status. When lit:

 Green: Line is idle.

 Red (steady): Line is active or in use.

 Red (blinking): Line is on hold.

 Orange: Line is unregistered and cannot

be used.

5) Soft Keys - Press a soft key button to

perform the action shown on the label on

the LCD screen above.

6) Navigation button - Press an arrow to

scroll left, right, up, or down through items

shown on the LCD screen.

7) Messages button - Press to access voice

mail.

8) Hold button - Press to place a call on

hold.

9) Set up button - Press to access a menu to

configure features and preferences (such

as your directory and speed dials), access

your call history, and set up functions

(such as call forwarding).

10) Mute button - Press to mute or unmute

the phone. When phone is muted, the button glows red. A flashing mute button indicates

the network connection cannot be found.

11) Headset button - Push to turn the headset on or off. When the headset is on, the button

glows green

12) Volume button - Press + to increase the volume and - to lower the volume of the

handset, headset, speaker (when the handset is off the phone), or ringer volume (when

the handset is on the phone).

13) Speaker button - Push to turn the speaker on or off. When the speaker is on, the button

glows green.

14) Keypad - Use to dial phone numbers, enter letters, and choose menu items.