Cisco SPA 508G 사용자 설명서 - 페이지 9

{카테고리_이름} Cisco SPA 508G에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA 508G 19 페이지. Barracuda phone system
Cisco SPA 508G에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (2 페이지), 사용자 설명서 (2 페이지), 사용자 설명서 (8 페이지), 빠른 시작 매뉴얼 (6 페이지), 빠른 참조 매뉴얼 (4 페이지), 빠른 시작 매뉴얼 (7 페이지)

Using Basic Phone Functions

To use the speakerphone, press the Speaker button (the handset can be either on or off hook).

NOTE:

Steps to use your headset with the IP phone may vary. Consult the user

documentation for your headset for more information.

To use a wired headset, press the Headset button on your phone and dial the number to

place a call, or press the headset button to answer a ringing call.

To use a wireless headset, lift the receiver off hook before speaking or listening through the

headset.

Any of these audio devices can be used during a call. Only one device at a time can be used.

The handset can be on the hook when using the speakerphone or headset function. If switching

from the handset to the speakerphone, make sure the speakerphone or headset light is

illuminated before placing the handset back on the hook. (If you are switching from the handset

to a wireless headset, however, do not replace the handset or you will disconnect the call.)

Choosing this option sends audio to the speaker when the handset is lifted.

STEP 1.

Press the Setup button.

STEP 2.

Select Preferences.

STEP 3.

Choose Send Audio to Speaker > edit.

STEP 4.

Press y/n to enable or disable the feature.

STEP 5.

Press ok.

STEP 6.

Press save.

SPA 500 Series IP Phone Advanced User Guide

9 |

P a g e