3Com SuperStack II Switch 1100 ATM 빠른 설치 매뉴얼 - 페이지 2

{카테고리_이름} 3Com SuperStack II Switch 1100 ATM에 대한 빠른 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3Com SuperStack II Switch 1100 ATM 6 페이지. Atm expansion module

: Q

HAPTER

UICK

NSTALLATION

Warning: Disconnect the Switch from the network,

power it off and then disconnect the Switch from the

main power supply.

Step 1:

Remove the blank plate that is located at the back of

the SuperStack II Switch, by unscrewing the two Phil-

lips screws as shown in Figure 1.

Retain the blank plate and the screws for future use.

Figure 1 Removing the Blank Plate

Blank Plate

II S

1100/3300 ATM E

UIDE FOR THE

UPER

TACK

WITCH

XPANSION

ODULE

Step 2:

Hold the module with the cutout on your front left

side,without touching the top or bottom of the circuit

board. Use the guide rails within the switch slot to

align the ATM Expansion Module as shown in

Figure 2.

Slide the ATM Expansion Module into the slot. Ensure

that the module is fully engaged to the switch. You

should hear a click.

Figure 2 Aligning and Inserting the ATM Expansion Module

Cutout