Ricoh SP 203SFN 소프트웨어 설치 매뉴얼 - 페이지 15

{카테고리_이름} Ricoh SP 203SFN에 대한 소프트웨어 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 203SFN 21 페이지. Software installation guide
Ricoh SP 203SFN에 대해서도 마찬가지입니다: 빠른 설치 매뉴얼 (2 페이지)

페이지 인쇄
Ricoh SP 203SFN 소프트웨어 설치 매뉴얼
Changing the IP Address Settings Using the Web Image Monitor
Starting Web Image Monitor
1.
Launch the Web browser.
2.
In the address bar, enter "http://(machine's IP address)/".
•
IPv4 Address
Enter the IP address shown on the network setting list.
Use a computer using the IP address shown on the network setting list with its variable
part modified.
•
IPv6 Address
Enter the IP address shown in "Link-local Address" in the network setting list. Enclose the
IP address in square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".
3.
Click [Log in].
4.
Enter the administrator password, and then click [Log in].
If you are logging in for the first time, enter "admin133" as the password.
Configuring the Machine Settings to Obtain an IPv4 Address Automatically
Check that [DHCP] is set to [Enable] in [IPv4] in Web Image Monitor. If [DHCP] is set to [Enable],
the machine can automatically obtain the IP address.
CTT163
15