Ricoh SP 211 설정 매뉴얼 - 페이지 21
{카테고리_이름} Ricoh SP 211에 대한 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh SP 211 25 페이지.
Ricoh SP 211에 대해서도 마찬가지입니다: 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지), 설정 매뉴얼 (24 페이지)
페이지 인쇄
Configuring the IP Address Settings Using the Web Image Monitor
Starting Web Image Monitor
Launch the Web browser.
In the address bar, enter "http://(machine's IP address)/".
•
IPv4 Address
Enter the IP address shown on the configuration page.
Use a computer using the IP address shown on the configuration page with its variable part modified.
•
IPv6 Address
Enter the IP address shown in "Link-local Address" on the configuration page. Enclose the IP address in
square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".
Configuring the Machine's IPv4 Address Automatically
Launch Web Image Monitor.
Click [Network Status].
Set [DHCP] to [Active].
•
For details about configuring the IPv6 address, see the User Guide
Configuring the Machine's IPv4 Address Manually
Launch Web Image Monitor.
Click [Network Status].
Set [DHCP] to [Inactive].
Specify the IP address in [IP Address].
Specify the subnet mask and default gateway address as required in accordance with the network environ‑
ment.
Specify other settings if necessary.
Enter the administrator password if required.
Click [OK].
•
For details about configuring the IPv6 address, see the User Guide
DCT060
.
DCT061
.
21