Ricoh Stella S-C1a 사용 설명서 - 페이지 2

{카테고리_이름} Ricoh Stella S-C1a에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Stella S-C1a 26 페이지. System settings

Introduction

This manual contains detailed instructions on the operation and maintenance of this machine. To get

maximum versatility from this machine all operators should carefully read and follow the instructions in

this manual. Please keep this manual in a handy place near the machine.

Please read the Safety Information in the Copy Reference before using this machine. It contains im-

portant information related to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS.

Notes:

Some illustrations in this manual might be slightly different from the machine.

Certain options might not be available in some countries. For details, please contact your local dealer.

Operator Safety:

This machine is considered a class I laser device, safe for office/EDP use. The machine contains a

5-milliwatt, 760 - 800 nanometer wavelength, GaAIAs laser diode. Direct (or indirect reflected) eye con-

tact with the laser beam might cause serious eye damage. Safety precautions and interlock mecha-

nisms have been designed to prevent any possible laser beam exposure to the operator.

The following label is attached on the back side of the machine.

Laser Safety:

The optical housing unit can only be repaired in a factory or at a location with the requisite equipment.

The laser subsystem is replaceable in the field by a qualified Customer Engineer. The laser chassis is

not repairable in the field. Customer engineers are therefore directed to return all chassis and laser sub-

systems to the factory or service depot when replacement of the optical subsystem is required.

Warning:

Use of controls or adjustment or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Notes:

The models of the machines do not appear in the following pages. Check the type of your machine be-

fore reading this manual. (For details, see p.3 "Machine Types".)

•

Type 1: No fax function installed

•

Type 2: Fax function installed

Certain types might not be available in some countries. For details, please contact your local dealer.

Two kinds of size notation are employed in this manual. With this machine refer to the metric version.

For good copy quality, the supplier recommends that you use genuine toner from the supplier.

The supplier shall not be responsible for any damage or expense that might result from the use of parts

other than genuine parts from the supplier with your office products.

Power Source:

220-240V, 50/60Hz, 4A or more

Please be sure to connect the power cord to a power source as above. For details about power source,

see "Power Connection" in the Copy Reference manual.