Cisco SPA232D 사용자 설명서 - 페이지 7

{카테고리_이름} Cisco SPA232D에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA232D 10 페이지. Ip dect handset
Cisco SPA232D에 대해서도 마찬가지입니다: 빠른 시작 매뉴얼 (17 페이지)

4.0 Configuring Call Settings

To reach the Call Settings menu, press the centre Select button, scroll to Call Settings, and press the centre

Select button again.

In the Call Settings menu, press the up and down arrow buttons to select the settings you want to change and

press the Select button. Available configuration options are described in the following sections.

You can configure up to 9 speed dials (numbers 2 through 9 and 0) on your handset. A speed dial number can be

configured by pressing and holding an unassigned number on the keypad, or by using the Call Settings menu on

the handset.



Do Not Disturb: Incoming calls do not reach the handset and they will not display in the Received Calls list. If

more than one handset is connected to the base station and the DND is enabled then all the handsets are

synchronised and will not accept calls.



Call Waiting: If call waiting is enabled, while on a call, a beep tone will alert you of a second incoming call.



Block Caller ID: Prevents your Caller ID information from being sent when placing a call.



Block Anonymous Call: Blocks incoming calls to your handset from callers who have blocked their Caller

ID.

Cisco SPA302D and SPA232D full user guide v1.0