Cisco SPA300 Series 사용자 설명서 - 페이지 16

{카테고리_이름} Cisco SPA300 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA300 Series 38 페이지. Configure ring type
Cisco SPA300 Series에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 빠른 참조 카드 (2 페이지), 빠른 참조 카드 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (3 페이지), 사용 설명서 (3 페이지), 매뉴얼 (2 페이지), 매뉴얼 (2 페이지), 빠른 사용 설명서 (2 페이지)

Getting Started

Installing the Cisco SPA302D

STEP 7

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

Enter the PIN code (available from your phone system administrator). By default,

there is no PIN code. Press the Left softkey to confirm that you want to register the

handset. The "registering" message appears.

To verify that the handset registered to the base station, confirm that the DECT

signal strength icon is solid (not flashing) and that the handset ID, such as Handset

1 (or Handset 2), appears near the top right corner of the display screen.

Deregistering the Handset

To remove the association between the Cisco SPA302D handset and the Cisco

SPA232D base station, you must deregister the handset.

On the Cisco SPA302 handset, press the Select button in the center of the 4-way

navigation keypad.

Using the navigation arrow buttons, scroll to the Settings icon and press the

center Select button to select it.

Select Handset Registration.

Select Deregister.

Enter the PIN code (available from your phone system administrator). By default,

there is no PIN code; however, a PIN code may be set by your administrator to

prevent inadvertent deregistration of another handset. Press the Left softkey to

confirm.

A list of all handsets registered to the Cisco SPA232D appears. Choose your

handset from the list and press the center Select button. (Be sure to choose the

correct handset.)