Cisco SPA300 Series 사용자 설명서 - 페이지 22

{카테고리_이름} Cisco SPA300 Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco SPA300 Series 38 페이지. Configure ring type
Cisco SPA300 Series에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 빠른 참조 카드 (2 페이지), 빠른 참조 카드 (2 페이지), 빠른 시작 매뉴얼 (2 페이지), 빠른 시작 매뉴얼 (3 페이지), 빠른 시작 매뉴얼 (3 페이지), 사용 설명서 (3 페이지), 매뉴얼 (2 페이지), 매뉴얼 (2 페이지), 빠른 사용 설명서 (2 페이지)

Using Your Cisco SPA302D

Placing a Three-Way Conference Call

STEP 1

STEP 2

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

You can create a conference call between you, the caller on an active call with you,

and a third party. To create a conference call:

Press the Options softkey during an active call. The first call is placed on hold, a

second line is opened, and you hear a tone. Enter the second telephone number on

the keypad. The number is automatically dialed.

When the second party answers, press the Options softkey and choose

Conference. The three calls are connected and the display screen shows that a

conference call is in progress. When you hang up, the conference call is ended for

all parties.

You can pick up a call that is ringing at another extension. Depending on the way

your telephone network is configured, you can pick up a call in the following ways:

•

Pick up a call that is ringing at a handset in your group by pressing the

Options softkey and selecting Grp Pickup. The phone displays any

handsets in the group that have ringing calls. Choose the call to pick up and

press the center Select button.

•

Pick up a call that is ringing at specific extension by pressing the Options

softkey and selecting Pickup. Enter the handset number where the call you

want to pickup is ringing and press the Start Call button.

You can park a call on a designated line ("parking lot") so that another person in

your office can retrieve the call. The call is active until it is unparked or the caller

hangs up.