Ricoh Aficio CL3000DN 보충 설명서 - 페이지 14

{카테고리_이름} Ricoh Aficio CL3000DN에 대한 보충 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio CL3000DN 38 페이지. Unix supplement
Ricoh Aficio CL3000DN에 대해서도 마찬가지입니다: 옵션 매뉴얼 (48 페이지)

페이지 인쇄

UNIX Configuration

Note

❒ The /etc/printcap file is used to register the name and attributes of a print-

er. You must make an entry for the network printer in the /etc/printcap

file of all workstations using the network printer.

❒ Each entry is separated with colons into several fields. The syntax is to be-

gin each entry with a colon, followed by the entry, and then end with a co-

lon, a back slash, and then a return.

❒ The first line of the field is the name of the printer. You use this name when

logging on to a network printer from a workstation. You can define several

different names by separating each name with the "|" character.

❒ The second and following lines contain the printer's attributes. Attributes

of the printer are represented by two character names referred to as capa-

bilities. For more information about capabilities, see the following table.

Capability

❖ ❖ ❖ ❖ Making the spool directory

Create a spool directory under /var/spool/lpd. The name of the spool direc-

tory should be the name of the printer followed by a "d".

Note

❒ The spool directory is used to control the data used for a print job. For ex-

ample, when a print job is created, a temporary copy of the file data used

for printing is created in the spool directory. All workstations accessing the

network printer require a spool directory for the network printer.

❒ A spool directory should be made for every network printer entry listed in

the /etc/printcap file.

Explanation

Host name of the printer

Optional specification

"lp" will be assigned, if the option

is not used.

Path name of the spool directory

Path name of the log file

Maximum file size which the di-

rectory can copy. When the size is

set to 0, the size is unlimited. If

nothing is entered, the size is set to

1024 k.

Value Required for the Network

Printer.

The host name that was registered

with the /etc/hosts file

Select options for printing. For

more information about available

options, see p.19 "Specifying the

Device Option".

Path name of the spool directory

that is to be created

Path name of the log file.

For example /var/log/lpd-errs

None or something suitable