Ricoh Aficio GX e3300N 설치 매뉴얼 - 페이지 3

{카테고리_이름} Ricoh Aficio GX e3300N에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio GX e3300N 12 페이지. Sublijet-r printer setup & oem driver installation
Ricoh Aficio GX e3300N에 대해서도 마찬가지입니다: 사양 (4 페이지), 설치 매뉴얼 (13 페이지)

페이지 인쇄
Ricoh Aficio GX e3300N 설치 매뉴얼
Printer setup & OeM driver Installation
1.) Open the printer box, remove the cables and other accessories, and place them aside. Next, remove the
printer from the box, and place it on a sturdy work surface with sufficient operational clearances (the printer
weighs approximately 31 lb). Finally, remove the orange adhesive tape and attach the power cord and the
USB cable. dO NOT POWeR ON THe PRINTeR AT THIs TIMe.
2.) Remove the SubliJet-R ink cartridges from their packages. Open the right front cover on the printer, and
insert the cartridges in the order indicated—from left to right (as you face the printer): black (K), cyan (C),
magenta (M) and yellow (Y). Press each cartridge in until it engages securely, and close the cover once all
of the cartridges are in place. Never shake or agitate the cartridges.
3.) Remove the paper tray, pull the cover straight up, and adjust the guides for the paper size you will be using.
Load the paper, put the cover back on, and reinsert the tray into the printer. For larger paper sizes, refer to
the documentation provided with your Ricoh printer for extending the paper tray.
Ricoh GX e3300N
 
 
 
 
 
 
 
 
 
 
PAGe 1 of 2 >>