Ricoh Aficio MP 2000L 네트워크 매뉴얼 - 페이지 12

{카테고리_이름} Ricoh Aficio MP 2000L에 대한 네트워크 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio MP 2000L 34 페이지. Network guide
Ricoh Aficio MP 2000L에 대해서도 마찬가지입니다: 사양 시트 (2 페이지)

페이지 인쇄

Connecting the Network Cable to the Network

Connecting to the Ethernet

Interface

The network interface board supports

10BASE-T or 100BASE-TX connec-

tions.

Turn off the main power switch.

Important

❒ Make sure the main power is

off. See "Turning On the Pow-

er", Copy Reference.

Loop the network interface cable

and attach the ferrite core.

Note

❒ The network interface cable loop

should be about 10 cm (4")(A)

from the end of the cable (clos-

est end to the printer). The fer-

rite core at the end of the cable

should be a ring type.

Connect the network interface ca-

ble to the 10BASE-T/100BASE-TX

port.

Turn on the main power switch.

Indicator (green)

Remains green when the machine is

properly connected to the network.

Indicator (yellow)

Turns yellow when 100 BASE-TX is

operating. Turns off when 10 BASE-T

is operating.

AAW026S1

AAW022S1

ANY001S