Ricoh Aficio MP 5001 참조 매뉴얼 - 페이지 6

{카테고리_이름} Ricoh Aficio MP 5001에 대한 참조 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio MP 5001 10 페이지. Sap printing
Ricoh Aficio MP 5001에 대해서도 마찬가지입니다: 사양 (6 페이지), 빠른 참조 매뉴얼 (42 페이지), 빠른 시작 매뉴얼 (19 페이지), 설치 매뉴얼 (16 페이지), 문제 해결 매뉴얼 (23 페이지), 사용자 설명서 (41 페이지), 매뉴얼 (12 페이지), 참조 매뉴얼 (9 페이지)

Paper Selection

The paper select feature allows you to manually select the desired paper size for your copies.

1. Select 'Paper Select' on the basic copy interactive screen.

2. Select the appropriate paper size desired.

Auto – Copy is the same size as the original. This is the default setting

LTR – Copy is on 8 ½ x 11 paper, regardless of the size of the original

LGL - Copy is on 8 ½ x 14 paper, regardless of the size of the original

11 x 17 – Copy is on 11 x 17 paper, regardless of the size of the original

Bypass – The bypass tray found on the side of the copier allows for the use of special sized

paper that does not fall into one of the above paper trays listed. Standard sized documents can

also be fed through the bypass tray as well (Letterhead or color paper)

3. Enter the number of copies desired and press 'Start'.

This function enables you to make two-sided copies from one- or two-sided originals or one-sided copies

from two-sided originals.

- This feature enables you to make two-

sided copies from one-sided originals.

1. Select the desired option from the main display

screen or select 'Dup./Combine/Series' on the

interactive screen

2. Select 'Duplex'

3. Select '1 Sided →2 Sided' and

select 'OK'

4. Place the originals in the Automatic Document Feeder

and press 'Start'

Making Two-sided Copies from Two-sided Originals

(2- 2 sided) – This feature enables you to copy two-sided originals on the front and back sides of the

paper.

1. Select the desired option from the main display screen or select 'Dup./Combine/Series' on the

interactive screen

2. Select 'Duplex'

3. Select '2 Sided →2 Sided' and select 'OK'

4. Place the originals in the Automatic Document Feeder and press 'Start'