Ricoh Aficio MP 7000 사용자 설명서 - 페이지 9

{카테고리_이름} Ricoh Aficio MP 7000에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio MP 7000 41 페이지. Sap printing
Ricoh Aficio MP 7000에 대해서도 마찬가지입니다: 브로셔 및 사양 (6 페이지), 빠른 시작 매뉴얼 (19 페이지), 빠른 시작 매뉴얼 (45 페이지), 문제 해결 매뉴얼 (23 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

PaperCut – Ricoh Embedded Manual

5. Make sure all the options are NOT enabled (i.e. not highlighted).

2.2.6.2 Enabling Enhanced External Charge Unit support

Once the system parameter has been enabled, the Enhanced External Charge Unit on the

device should be enabled as follows:

1. Go to the Ricoh admin/settings by pressing the "User Tools/Counter" hard key (on

the top left of the device panel).

2. Select the "System Settings" button

3. Select the "Administrator Tools" tab

4. Select the "Enhanced External Charge Unit Management" button (usually on the

bottom left of the 2

different SDKs).

5. Enable all of the "Copy" options (e.g. Full Color, Black and White , Two-Color, Single

Color).

6. Enable the "Document Server" option (because this is an alternate way to perform

copying and this should be locked/tracked too).

7. (Optional) To restrict/track Faxing and Scanning, also enable the "Facsimile" and

"Scanner" options. You will need to do this if you enable "Track & Control scanning"

and "Track & control faxing" for this device in PaperCut.

8. IMPORTANT: Ensure that you do NOT enable the "Printer" options because this will

cause print jobs to be blocked by the device.

9. Press OK to save the changes.

To verify that the enhanced external charge unit is enabled properly, exit out of the "System

Settings", and then select the "Copier" button. If the charge unit is enabled properly the

Revision: 19

page, -see screenshot, although location may vary slightly for

If this button is disabled see section 2.2.5 above.

2012-10-26

9 of 41