Ricoh Aficio SP 1200SF 빠른 설정 매뉴얼 - 페이지 24
{카테고리_이름} Ricoh Aficio SP 1200SF에 대한 빠른 설정 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Aficio SP 1200SF 36 페이지. Quick installation guide
Ricoh Aficio SP 1200SF에 대해서도 마찬가지입니다: 사양 (4 페이지), 운영 매뉴얼 (17 페이지)
페이지 인쇄
STEP 1
Setting Up the Machine
9
Selecting a receive mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD. Choose the
Receive Mode which best suits your needs.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
1
Press
2
Press 0.
3
Press 1.
4
Press
Press OK.
5
Press
For more details, see Receiving a fax in
Chapter 6 of the User's Guide.
22
No
Fax Only
Your machine
automatically answers
every call as a fax.
Yes
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the phone will
ring for you to pick up
the call.
No
Manual
You control the phone
line and must answer
every call yourself.
Yes
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
automatically printed.
Menu.
or
to select the mode.
Stop/Exit.
10
Setting the phone line type
(For EU model)
If you are connecting the machine to a line that
features a PABX (PBX) or ISDN to send and receive
faxes, it is also necessary to change the phone line
type accordingly by completing the following steps.
1
Press
Menu.
2
Press 0.
3
Press 6.
4
Press
or
to choose PBX, ISDN
or Normal.
Press OK.
Do one of the following:
If you choose ISDN or Normal, go to step
8.
If you choose PBX, go to step 5.
5
Do one of the following:
If you want to change the current prefix
number, press 1 and go to step 6.
If you do not want to change the current
prefix number, press 2 and go to step 8.
Note
The default setting is "!". When you press
Hook, "!" will be displayed on the LCD.
6
Enter the Prefix number (up to 5 digits) on the
dial pad, and then press OK.
Note
You can use the number 0 to 9 , # ,
(Press
Hook to display "!".)
You cannot use ! with any other numbers or
characters.
If your telephone system requires a timed break
recall, press
Hook to enter the break.
7
Press
or
to choose On or Always and
press OK.
Note
• If you choose On, pressing
displays "!") will let you access an outside line.
• If you choose Always, you can access an outside
line without pressing
8
Press
Stop/Exit.
and !.
l
Hook (the screen
Hook.