Cisco UNIFIED 6911 관리 매뉴얼 - 페이지 4

{카테고리_이름} Cisco UNIFIED 6911에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco UNIFIED 6911 10 페이지. Telefone ip cisco unified
Cisco UNIFIED 6911에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 사용자 설명서 (15 페이지), 관리 매뉴얼 (12 페이지), 사용자 설명서 (50 페이지), 빠른 참조 카드 (2 페이지), 매뉴얼 (10 페이지), 매뉴얼 (28 페이지), (포르투갈어) 빠른 시작 (1 페이지)

Installing the Cisco Unified IP Phone

You must connect the Cisco Unified IP Phone to the network and to a power source before using it. See

Figure 3-1

Figure 3-2

To install a Cisco Unified IP Phone, perform the tasks described in

Table 3-1

Installing the Cisco Unified IP Phone 6901 and 6911

Task

Purpose

Connect the handset to the Handset port.

Optional. Connect the power supply to the Cisco DC Adapter

port.

Connect a straight-through Ethernet cable from the switch to

the network port labeled Network on the Cisco Unified

IP Phone 6901 and 6911.

Each Cisco Unified IP Phone ships with one Ethernet cable in

the box.

You can use either Category 3/5/5e cabling for 10-Mbps

connections, but you must use Category 5/5e for 100 Mbps

connections.

(Cisco Unified IP Phone 6911)

Connect a straight-through Ethernet cable from another

network device, such as a desktop computer, to the access port

labeled Computer.

Optional. You can connect another network device later if you

do not connect one now.

You can use either Category 3/5/5e cabling for 10-Mbps

connections, but you must use Category 5/5e for 100 Mbps

connections.

Cisco Unified IP Phone 6901 and 6911 Administration Guide for Cisco Unified Communications Manager 8.0 (SCCP)

3-4

for a graphical representation of the connections for a Cisco Unified IP Phone 6901 and

for a graphical representation of the connections for a Cisco Unified IP Phone 6911.

Chapter 3

Setting Up the Cisco Unified IP Phone

Table

3-1.