Cisco Unified 6921 관리 매뉴얼 - 페이지 6

{카테고리_이름} Cisco Unified 6921에 대한 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified 6921 14 페이지. Cisco systems telephone
Cisco Unified 6921에 대해서도 마찬가지입니다: 데이터시트 (5 페이지), 릴리스 정보 (18 페이지), 데이터시트 (5 페이지), 사용자 설명서 (38 페이지), 설정 매뉴얼 (16 페이지), 특징 (29 페이지), 사용자 설명서 (24 페이지), 사용자 설명서 (17 페이지), 빠른 시작 (2 페이지), 빠른 시작 매뉴얼 (7 페이지), 빠른 참조 매뉴얼 (7 페이지), 빠른 설치 및 사용자 설명서 (12 페이지), 참조 매뉴얼 (4 페이지), 빠른 참조 카드 (2 페이지), 관리 매뉴얼 (19 페이지), 사용자 설명서 (19 페이지), 빠른 사용 설명서 (7 페이지), 빠른 설치 매뉴얼 (12 페이지), 빠른 참조 매뉴얼 (2 페이지), 빠른 참조 매뉴얼 (2 페이지), (포르투갈어) 빠른 시작 설명서 (2 페이지), (포르투갈어) 빠른 시작 설명서 (2 페이지)

Understanding Phone Configuration Files

If the device security mode in the configuration file is set to secure, but the phone has not received a

Note

CTL file, the phone tries four times to obtain a CTL file so it can register securely.

Cisco Extension Mobility Cross Cluster is an exception, in that the phone permits a TLS connection to

Note

Cisco Unified CM for secure signaling even without the CTL file.

If you configure security-related settings in Cisco Unified CM Administration, the phone configuration

file will contain sensitive information. To ensure the privacy of a configuration file, you must configure

it for encryption. For detailed information, refer to the "Configuring Encrypted Phone Configuration

Files" chapter in Cisco Unified Communications Manager Security Guide. A phone requests a

configuration file whenever it resets and registers with Cisco Unified CM.

A phone accesses a default configuration file named XmlDefault.cnf.xml only when the phone has not

received a valid Trust List file containing a certificate assigned to the Cisco Unified CM and TFTP.

If auto registration is not enabled and you did not add the phone to the Cisco Unified CM database, the

phone does not attempt to register with Cisco Unified CM. The phone continually displays the

"Configuring IP" message until you either enable auto-registration or add the phone to the Cisco Unified

CM database.

If the phone has registered before, the phone will access the configuration file named

SEPmac_address.cnf.xml, where mac_address is the MAC address of the phone.

For SIP phones, the TFTP server generates these SIP configuration files:

SIP IP Phone:

•

–

Dial Plan—<dialplan>.xml

•

Softkey Template—<softkey_template>.xml

•

The filenames are derived from the MAC Address and Description fields in the Phone Configuration

window of Cisco Unified CM Administration. The MAC address uniquely identifies the phone.

For more information on phone configuration settings, go to the

chapter in the Cisco Communications Manager Administration Guide.

For more information also refer to the Cisco Unified Communications Manager Security Guide.

Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)

2-6

For unsigned and unencrypted files—SEP<mac>.cnf.xml

For signed files—SEP<mac>.cnf.xml.sgn

For signed and encrypted files—SEP<mac>.cnf.xml.enc.sgn

Cisco Unified IP Phone Configuration

Chapter

OL-24567-01