Ricoh Martini-C3 기술 게시판 - 페이지 28

{카테고리_이름} Ricoh Martini-C3에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Martini-C3 36 페이지.

5. Do these communication switch settings:

SP1104-23 (Switch 16)

6. Exit the Service Mode and cycle the machine off/on with the main power switch.

7. Do SP5990-001 to print the system parameter list, then confirm that "G3" is

listed as an option.

8. Enter the Service Mode and set the items required for PSTN communication.

• If one G3 line is installed, use SP3103 (PSTN-1 Port Settings) to do the

PSTN settings.

• If two G3 lines are installed, use SP3103 (PSTN-1 Port Settings) and

SP3104 (PSTN-2 Port Settings) to do the PSTN settings for the first and

second G3 line.

Set Bit 1 "1".

Set Bit 3 "1" if two G3 boards are installed.

1-226

February 2008