Ricoh P7026N 기술 게시판 - 페이지 36
{카테고리_이름} Ricoh P7026N에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh P7026N 46 페이지.
페이지 인쇄
Reissued: 27-Dec-02
Model:
Model K-P1
Firmware modified to correct the following problem:
1.
Modified so the machine can be used with Axis print servers.
2.
Modified to correct Polish and Portuguese wording errors.
Firmware modified to correct the following problem:
In rare cases with graphic images, a dark band appears or part of the image
becomes black on printouts.
1.
Firmware modified to improve print quality when image data is printed using
the PCL6 driver.
Note: This occurs only in the following condition.
- When printing image data
- When using the PCL6 driver
2.
New feature added in the user mode.
"Curl Prevention" mode is added in the user mode.
(Curl Prevention: User mode/ Maintenance)
Please note that the function of this mode is the same as the "Curl Control" in
the printer engine service mode.
It lowers the fusing temperature to prevent paper from curling. Advise
customer to use this mode when paper jam occurs during duplex rear side
printing.
Note: When this mode is switched on, the "Curl Control" in the service mode is
also switched on.
Firmware modified to correct the following problem.
Symptom:
In PCL printing, if data exists over the bottom edge of the printable area, the
machine freezes, displaying "Processing" and operation will no longer be possible.
Condition:
Printer driver is not being used
Print data exists on the bottom edge of the printable area (at 4.2mm)
Action: Update the controller firmware.
Firmware modified to make corrections in the German wordings.
T
echnical
Descriptions
4.2
mm
Printable area
The problem occurs only if
data exists on the bottom
edge (4.2mm) of the printable
area .
B
ulletin
Date:
12-Apr-01
PAGE: 3/4
No.:
RG058001d
Version
1.08
1.06
1.05
1.05
1.02