Ricoh Plockmatic SquareBack Trimmer 운영자 매뉴얼 - 페이지 40

{카테고리_이름} Ricoh Plockmatic SquareBack Trimmer에 대한 운영자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Plockmatic SquareBack Trimmer 45 페이지. Cip training

CIP Training Plockmatic SquareBack Trimmer

Operational Best Practices

Limitations

•

The Square Back Trimmer is suited for customers whose booklet making needs will not

exceed a yearly average of 15,000 booklets per month;

•

If booklets entering the Square Back Trimmer are not uniform or if they are skewed, the

booklet quality will vary accordingly;

•

The maximum recommended number of sheets that can be bypassed without stapling is 6

sheets of 80 gsm. If there is very low friction between the sheets, running non-stapled sets

may be difficult;

•

Non-stapled books should not be trimmed or square folded;

•

If booklets are made of paper lighter than 80GSM, the cover paper should be 80GSM or

more to get an acceptable output results when square folding;

•

Covers may show marking along the spine of the booklet from the clamps. The more

pages in the booklet, the more evident the marking;

•

Small booklets A5/ 5,5 x 8,5" or smaller may stack poorly on the conveyor;

•

Booklets will not be stacked on top of each other, therefore it is recommended that the

operator places a box underneath the stacker to collect the finished booklets;

•

Exiting booklets might be a bit skewed;

•

The booklet spine can, depending on paper quality and thickness, have different sizes of

tuft at its top and at its bottom;

•

If corners/edges of sheets by any reason are folded before trimming,

result may look as illustrated when corners/edges are unfolded.