Ricoh PRIPORT SILVER-V2 기술 게시판 - 페이지 7

{카테고리_이름} Ricoh PRIPORT SILVER-V2에 대한 기술 게시판을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh PRIPORT SILVER-V2 16 페이지.

Model:

PRIPORT SILVER/SILVER-V/SILVER-V2/SV2P

LOAD PROGRAM

This procedure is for upgrading the system firmware for the controller.

NOTE: If the controller does not start up after a firmware update, try to download the

firmware again. If it still does not work, you may need to replace the flash ROM on

the printer controller board.

CAUTION

Do not turn off the machine while downloading the firmware.

1. Before downloading new firmware, print the test page. Then check the current version.

2. Turn off the machine.

3. Remove the rear cover and the controller cover.

4. Put the jumper next to the flash ROM into the position [A].

5. Turn on the machine.

6. Boot up the PC and access the MS-DOS prompt or

Command Prompt.

7. Use the COPY command to update the flash ROM. e.g.

"copy file_name LPT1:" (where LPT1 is the connected port).

8. While the flash ROM is updating, the left LED [B] on the

control button board remains lit.

Technical Bulletin

No:

Date:

30-Sep-03

[B]

PAGE: 7/15

015

R-C231-

[A]

C249R957.WMF