Ricoh Pro 1356EX 사용자 설명서 - 페이지 29

{카테고리_이름} Ricoh Pro 1356EX에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Ricoh Pro 1356EX 41 페이지. Sap printing
Ricoh Pro 1356EX에 대해서도 마찬가지입니다: 사양 (6 페이지), 매뉴얼 (12 페이지)

페이지 인쇄

PaperCut – Ricoh Embedded Manual

product ID. See the screenshot below showing the application information for the

PaperCut embedded application. The product id is a 9 digit number and is

highlighted below.



Take note of the application product id.

To configure the application switch buttons:



On the "Devices" tab, select the Ricoh device to configure



Select the "Advanced Config" tab.



Locate the entry "ext-device.ricoh.app-button1.label". This is the text that appears

on the application button.



Change the button label to as appropriate, and press the "Update" button next to the

setting.



Locate the entry "ext-device.ricoh.app-button1.product-id". This will be set to

"DISABLED" to indicate the button is disabled.



Enter the product id of the application and press the "Update" button.



Confirm that the settings were saved. The settings will take effect after a short

period of time.

To create a second application switch button perform the same steps setting the "ext-

device.ricoh.app-button2.label" and "ext-device.ricoh.app-button2.product-id" settings.

To disable the application buttons set the product id settings to "DISABLED".

5.4 Configuring Swipe Card Readers

For a list of supported card readers please see Appendix A towards the end of this

document.

Swipe cards contain numbers which are used to identify users according to the card number

configured in the User Details screen under "Card/Identity" number. Some readers report

information in addition to the number encoded on the card, such as checksums. PaperCut

can treat these cases in two ways:

Revision: 19

2012-10-26

29 of 41