Cisco Unified 7900 Series 릴리스 정보 - 페이지 9

{카테고리_이름} Cisco Unified 7900 Series에 대한 릴리스 정보을 온라인으로 검색하거나 PDF를 다운로드하세요. Cisco Unified 7900 Series 20 페이지. Release notes for firmware release 9.3(1)sr2
Cisco Unified 7900 Series에 대해서도 마찬가지입니다: 시스템 매뉴얼 (50 페이지), 솔루션 매뉴얼 (10 페이지), 시스템 매뉴얼 (36 페이지), 사용자 설명서 (11 페이지)

페이지 인쇄

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2

To download and install the Cisco Unified Communications Manager version, perform these steps.

Procedure

Step 1

Go to the following URL:

http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&catid=278875240

Step 2

Choose your Cisco Unified Communications Manager version.

Step 3

Choose the appropriate software type.

Step 4

Hover over the desired file. When the popup window displays, click the Readme link to open the readme file.

Step 5

Choose Download or Add to cart for the desired file.

Step 6

Use the instructions in the readme file to install the updated file on the Cisco Unified Communications Manager.

Install Cisco Unified Communications Manager Device Packs

Device packs are required to enable IP phones in the Cisco Unified Communications Manager database. For

information about compatible device packs, see

compat/devpack_comp_mtx.html.

For Cisco Unified CallManager 4.2 and earlier, these device packs are required. For Cisco Unified CallManager

4.3 and Cisco Unified Communications Manager 6.0 and later, you must run the device pack and reboot the

Cisco Unified Communications Manager server.

To install the device packs, follow these steps.

Procedure

Step 1

Go to the following URL: .

http://www.cisco.com/cisco/software/navigator.html?mdfid=268439621&flowid=21301

Step 2

Choose your Cisco Unified Communications Manager version.

Step 3

Hover over the desired device pack. When the popup window displays, click the Readme link to open the

readme file.

Step 4

Choose Download or Add to cart for the desired device pack.

Step 5

Use the instructions in the readme file to install the updated device pack on the Cisco Unified Communications

Manager.

Install firmware release on Cisco Unified Communications Manager

Before using the Cisco Unified IP Phone 7900 Series Firmware Release 9.3(1)SR2 with Cisco Unified

Communications Manager, you must install the latest firmware on all Cisco Unified Communications Manager

servers in the cluster.

Install Cisco Unified Communications Manager Device Packs

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2